FREE PLANNING RESOURCE

Restaurant Kitchen Equipment Planning Checklist

Use this checklist to turn a restaurant concept into a clear equipment brief. It helps you collect the information a supplier, designer or local professional will need to review. It does not replace site measurements, equipment specifications, engineering or local code review.

Start with these three steps

  1. 01

    Describe the operation

    Record the menu, service style, operating hours and expected busiest service. Separate daily items from seasonal or occasional items.

  2. 02

    Map the work

    Follow food and dish flow from receiving and storage through preparation, cooking, service, warewashing and waste handling.

  3. 03

    Check the site before selecting models

    Collect a measured floor plan, existing utility locations, access routes and opening constraints. Compare these with current manufacturer cut sheets.

1. Write down menu and service assumptions

Equipment capacity depends on what you serve and when you serve it. Capture the assumptions instead of choosing equipment from a generic list.

  • List the menu by service period, including items that are cooked to order, batch prepared, held or served cold.
  • Record expected average and peak covers per service, opening hours, days per week and any known seasonal changes.
  • Note delivery, takeaway, catering, dine-in or drive-through work separately because each can change the packaging and pass workflow.
  • Mark menu items that share a cooking or preparation step; note any item that needs a dedicated process or separate handling.
  • Identify the tasks that must happen at the same time during the busiest service.

2. Map stations and equipment functions

Start with the task each item must perform. Treat the examples below as planning prompts, not a recommended package or a confirmed product offer.

  • Receiving and storage: delivery staging, dry storage, refrigeration and freezer needs.
  • Preparation: work surfaces, food preparation tools, mixers or slicers where the menu calls for them.
  • Cooking: ranges, ovens, griddles, fryers or other cooking functions that match the actual menu.
  • Finishing and service: holding, pass, plating, beverage, takeaway and packaging tasks.
  • Warewashing and cleaning: dishwashing workflow, sinks, drying and cleaning storage.
  • Support: waste handling, handwashing locations, ventilation and utility connections to be reviewed for the site.

3. Measure the room and delivery route

Use a current, dimensioned plan where possible. A room area alone does not show whether equipment fits or can be installed.

  • Measure walls, doors, windows, columns, steps and changes in ceiling height; mark the units used.
  • Locate existing water, drainage, gas, electrical and exhaust points, and label what is verified versus unknown.
  • Record door widths, turns, stairs, lifts and other constraints along the route from unloading to the kitchen.
  • Mark fixed fixtures and areas that must remain clear for staff movement or building access.
  • Attach photos or drawings only as supporting context; verify critical dimensions on site before ordering.

4. Compare shortlisted equipment with its specifications

For each candidate, collect enough detail to check fit and project scope before treating it as selected.

  • Write the equipment function, intended quantity, manufacturer, model and current specification sheet or product URL.
  • Check the listed footprint, required clearances, door swing and any access needed for cleaning or maintenance.
  • Record the specified voltage, phase, amperage, plug or hardwire details, gas type, water, drainage and exhaust needs when applicable.
  • Flag every unknown utility, connection or capacity assumption for review by the appropriate supplier or qualified local professional.
  • Keep alternates separate from the preferred model until dimensions, utilities, availability and quote scope have been reviewed.

5. Separate equipment cost from project cost

A product price is not a complete installed-project budget. Ask for the parts of the scope that apply to your destination.

  • List equipment and smallwares separately, with quantity and the price basis stated in the quote.
  • Ask whether freight, taxes, unloading, assembly, connection, commissioning and installation are included or excluded.
  • Confirm destination, lead time, availability, warranty terms and who handles a damaged or missing item in writing.
  • Keep demo listings, estimates and unconfirmed alternatives clearly marked; do not treat them as confirmed stock or a final quote.

Printable planning worksheet

Fill in what you know. Mark the rest “to confirm” so it is not mistaken for a site fact.

Station or taskEquipment function / modelQuantityDimensions / utility notesStatus: known or to confirm
Menu and peak service
Receiving and storage
Preparation
Cooking line
Finishing and service
Warewashing and cleaning
Utilities and ventilation
Delivery and installation access
Local review and permits

Add rows for your menu and site. Check the current manufacturer specification for each shortlisted model.

Check local requirements with the right authority

The FDA Food Code is a model offered for adoption by jurisdictions; it is not a universal permit approval. Food-service requirements vary by state and locality. Confirm applicable rules with your local regulator and the qualified design or installation professionals for your project.

Kitchen planning questions

What should I choose first: the menu or the equipment?

Start with the menu and service assumptions. They define the work stations and capacity questions that equipment choices need to answer.

Can I use this checklist as a permit-ready kitchen plan?

No. It is an information-gathering worksheet. It does not establish code compliance, engineering, exhaust design, utility sizing or permit approval.

What should I send when requesting a kitchen design review?

Share the menu, service assumptions, measured floor plan, photos, known utility points, delivery constraints and the equipment you have already selected or need reviewed.

HUMAN REVIEW, PROJECT BY PROJECT

Bring your planning notes into a design brief.

kitchenPEAK's design service is USD $499. A human reviewer can discuss your operation, floor plan and open questions; site-specific requirements and final project scope are confirmed separately.

Start a kitchen design brief
Browse equipment · Read about supply and delivery